Suspension - Explorer Pro Comp Lift Kits - 3 inch Pro Comp Lift Kit

This kit provides a 3 inch lift; coil springs are designed and rated exclusively for the XJ. Includes front trac bar relocation bracket, Chromolly series lower control arms, and rear add-a-leafs. Hammer-tone gray powder coat finish. Front ride height 3.0 inch, rear ride height 2.0 inch. Front and rear X2 shocks included. Driveline modification may be necessary. Vehicles equipped with light duty, double offset joint (rubber boot) front driveshafts must be replaced with spicer constant velocity (CV) type. When vehicle is equipped with a V8 or winch, also order coil spacer P/N 55496 kit. Some vehicles may be equipped with a Chrysler Corporation rear axle and use P/N 50055. U-bolt P/N 50050 will not fit this axle. Please determine type of axle before installation. All ride height increases are approximate and will vary due to vehicle specification (ex. cab style, engine size, wheel offset, etc.).

This kit features a 3 inch lift. Includes front and rear coil springs, front trac bar relocation bracket, and Chromolly series lower control arms. Coil springs are designed and rated exclusively for the ZJ. Hammer-tone gray powder coat finish. Driveline modification may be necessary. Vehicles equipped with light duty, double offset joint (rubber boot) front driveshafts must be replaced with spicer constant velocity (CV) type. When vehicle is equipped with a V8 or winch, also order coil spacer P/N 55496 kit. All ride height increases are approximate and will vary due to vehicle specification (ex. cab style, engine size, wheel offset, etc.).