Rancho Suspension Lift Kits Increase ride height up to 3 inches utilizing front coil and rear leaf springs and urethane bushings. Increased height permits use of larger wheel and tire combinations, w/o the need for body and fender modifications. System
| 90817 |
Raised Height Front: 3 inches - Front Springs |
 |
All |
All |
'95-'97 |
200.34 |
149.95/each |
 |
| 90818 |
Raised Height Front: 3 inches - Front Kit - NOTE: Has grease fittings |
|
All |
All |
'95-'97 |
209.94 |
156.95/kit |
|
| 90819 |
Raised Height Rear: 1 1/2 inches - Rear Springs w/ 3 leaf rear springs Chrysler Type Rear Axle. NOTE: Quantity Required 2 |
|
All |
All |
'95-'97 |
157.14 |
121.95/each |
|
| 90820 |
Raised Height Rear: 1 1/2 inches - Rear Kit w/ 3 leaf rear springs Chrysler Type Rear Axle. NOTE: Dana has no outer lip on the rear cover. Chrysler does have an outer on the rear cover. |
|
All |
All |
'95-'97 |
70.74 |
59.95/kit |
|
| 90821 |
Raised Height Front: 3 inches |
|
All |
All |
'95-'97 |
200.34 |
149.95/each |
|
| 90822 |
Raised Height Front: 3 inches - Front Kit - NOTE: Has grease fittings |
|
All |
All |
'95-'97 |
209.94 |
156.95/kit |
|
| 90823 |
Raised Height Rear: 1 1/2 inches - Rear Springs w/ 3 leaf rear springs Dana 35 Rear Axle. NOTE: Quantity Required 2 |
|
All |
All |
'95-'97 |
157.14 |
121.95/each |
|
| 90824 |
Raised Height Rear: 1 1/2 inches - Rear Kit w/ 3 leaf rear springs Dana 35 Rear Axle. NOTE: Dana has no outer lip on the rear cover. Chrysler does have an outer on the rear cover. |
|
All |
All |
'95-'97 |
70.74 |
59.95/kit |
|
| 90825 |
Raised Height Front: 3 inches - Front |
|
All |
All |
'95-'97 |
200.34 |
149.95/each |
|
| 90826 |
Raised Height Front: 3 inches - Front Kit - NOTE: Has grease fittings |
|
All |
All |
'95-'97 |
209.94 |
156.95/kit |
|
| 90827 |
Raised Height Rear: 1 1/2 inches - Rear Kit w/ 4 leaf rear springs |
|
All |
All |
'95-'97 |
99.00 |
85.95/kit |
|
| 90828 |
Raised Height Front: 3 inches |
|
All |
All |
'84-'94 |
200.34 |
149.95/each |
|
| 90829 |
Raised Height Front: 3 inches - Front Kit - NOTE: Rancho highly recommends the use of the constant velocity (Spicer Style) front driveshaft as used in the Jeep factory trailer towing option. The Jeep original equipment light duty double offset joint |
|
All |
All |
'84-'94 |
176.34 |
126.95/kit |
|
| 90830 |
Raised Height Rear: 1 1/2 inches - Rear w/ 3 leaf rear springs Chrysler Type Rear Axle. NOTE: Quantity required 2 |
|
All |
All |
'84-'94 |
157.14 |
121.95/each |
|
| 90831 |
Raised Height Rear: 1 1/2 inches - Rear Kit w/ 3 leaf rear springs Chrysler Type Rear Axle- NOTE: Dana has no outer lip on the rear cover. Chrysler does have an outer on the rear cover. |
|
All |
All |
'84-'94 |
70.74 |
59.95/kit |
|
| 90832 |
Raised Height Front: 3 inches - Front - NOTE: Rancho highly recommends the use of the constant velocity (Spicer Style) front driveshaft as used in the Jeep factory trailer towing option. The Jeep original equipment light duty double offset joint fro |
|
All |
All |
'84-'94 |
200.34 |
149.95/each |
|
| 90833 |
Raised Height Front: 3 inches - Front Kit - NOTE: Coils should not be installed w/o Rancho lower control arms they are necessary for strength and proper caster adjustments. 2nd NOTE: Transfer case Lowering Kit may be required on some vehicles. |
|
All |
All |
'84-'94 |
176.34 |
126.95/kit |
|
| 90834 |
Raised Height Rear: 1 1/2 inches - Rear Springs w/ 3 leaf rear springs Dana 35 Rear Axle. NOTE: Quantity Required 2 |
|
All |
All |
'84-'94 |
157.14 |
121.95/each |
|
| 90835 |
Raised Height Rear: 1 1/2 inches - Rear Kit w/ 3 leaf rear springs Dana 35 Rear Axle. NOTE: Dana has no outer lip on the rear cover. Chrysler does have an outer on the rear cover. |
|
All |
All |
'84-'94 |
70.74 |
59.95/kit |
|
| 90836 |
Raised Height Front: 3 inches - Front - NOTE: Rancho highly recommends the use of the constant velocity (Spicer Style) front driveshaft as used in the Jeep factory trailer towing option. The Jeep original equipment light duty double offset joint fr |
|
All |
All |
'84-'94 |
200.34 |
149.95/each |
|
| 90837 |
Raised Height Front: 3 inches - Front Kit - NOTE: Coils should not be installed w/o Rancho lower control arms they are necessary for strength and proper caster adjustments. 2nd NOTE: Transfer case Lowering Kit may be required on some vehicles. |
|
All |
All |
'84-'94 |
176.34 |
126.95/kit |
|
| 90838 |
Raised Height Rear: 1 1/2 inches - Rear Kit w/ 4 leaf rear springs - NOTE: 4 leaf only |
|
All |
All |
'84-'94 |
99.00 |
85.95/kit |
|
Rancho Suspension Lift Kits Increase ride height up to 2 1/2 inches utilizing front and rear leaf springs and urethane bushings. Increased height permits use of larger wheel and tire combinations, w/o the need for body and fender modifications. System s
| 90839 |
Raised Height Front: 2 1/2 inches - NOTE: Remove 1/2 inch O.D. x 7/16 inch I.D. sleeves if used from the old sp[ring shackle ends and insert sleeves into the Rancho bushings. 2nd NOTE: Quantity required 2 |
|
All |
All |
'82-'86 |
130.07 |
106.95/each |
|
| 90840 |
Raised Height Front: 2 1/2 inches - Front Kit includes 2 Front Springs Urethane Bushings Front and Rear U-Bolts |
|
All |
All |
'82-'86 |
41.46 |
34.95/kit |
|
| 90841 |
Raised Height Rear: 2 1/2 inches - On CJ's with 4 speed transmissions rear driveline will need to be lengthened transfer case cross member will need to be lowered from frame 1/2 inch and driveline vibration will occur. Use Lowering Bracket kit to lowe |
|
All |
All |
'82-'86 |
148.74 |
117.95/each |
|
| 90842 |
Raised Height Rear: 2 1/2 inches - Rear Kit includes 2 Rear Springs Urethane Bushings Front and Rear U-Bolts |
|
All |
All |
'82-'86 |
41.46 |
34.95/kit |
|
| 90843 |
Raised Height Front: 1 inch NOTE: Quantity Required 2 |
|
All |
All |
'82-'86 |
149.94 |
117.95/each |
|
| 90844 |
Raised Height Front: 1 inch - Front Kit includes 2 Front Springs Urethane Bushings Front and Rear U-Bolts |
|
All |
All |
'82-'86 |
41.46 |
34.95/kit |
|
| 90845 |
Raised Height Rear: 1 inch - Rear - NOTE: Quantity Required 2 |
|
All |
All |
'82-'86 |
173.94 |
134.95/each |
|
| 90846 |
Raised Height Rear: 1 inch - Rear Kit includes 2 Rear Springs Urethane Bushings Front and Rear U-Bolts |
|
All |
All |
'82-'86 |
41.46 |
34.95/kit |
|
| 90847 |
Competition System - Raised Height Front: 2 inches NOTE: Height may be taller for non-race prepared vehicles. 2nd NOTE: Quantity Required 2 |
|
All |
All |
'76-'86 |
200.34 |
149.95/each |
|
| 90848 |
Competition System - Raised Height Front 2 inches - Front Kit includes 2 Front Springs Urethane Bushings Front and Rear U-Bolts NOTE: Height may be taller for non-race prepared vehicles. |
|
All |
All |
'76-'86 |
73.14 |
59.95/kit |
|
| 90849 |
Competition System - Raised Height Rear: 2 inches - NOTE: Height may be taller for non-race prepared vehicles. 2nd NOTE: Quantity Required 2 |
|
All |
All |
'76-'86 |
250.74 |
194.95/each |
|
| 90850 |
Raised Height Front: 2 1/2 inches - NOTE: Quantity Required 2 |
|
All |
All |
'76-'81 |
130.07 |
106.95/each |
|
| 90851 |
Raised Height Front: 2 1/2 inches - Front Kit includes 2 Front Springs Urethane Bushings Front and Rear U-Bolts |
|
All |
All |
'76-'81 |
41.46 |
34.95/kit |
|
| 90852 |
Raised Height Rear: 2 1/2 inches - NOTE: On CJ's with 4 speed transmissions rear driveline will need to be lengthened transer case cross member will need to be lowered from frame 1/2 inch and driveline vibration will occur. Use Lowering Bracket Kit |
|
All |
All |
'76-'81 |
148.74 |
117.95/each |
|
| 90853 |
Raised Height Rear: 2 1/2 inches - Rear Kit includes 2 Rear Springs Urethane Bushings Front and Rear U-Bolts |
|
All |
All |
'76-'81 |
41.46 |
34.95/kit |
|
| 90854 |
Raised Height Front: 1 inch - Front - NOTE: Quantity Required 2 |
|
All |
All |
'76-'81 |
149.94 |
117.95/each |
|
| 90855 |
Raised Height Front: 1 inch - Front Kit includes 2 Front Springs Urethane Bushings Front and Rear U-Bolts |
|
All |
All |
'76-'81 |
41.46 |
34.95/kit |
|
| 90856 |
Raised Height Rear: 1 inch - NOTE: Quantity Required 2 |
|
All |
All |
'76-'81 |
173.94 |
134.95/each |
|
| 90857 |
Raised Height Rear: 1 inch - Rear Kit includes 2 Rear Springs Urethane Bushings Front and Rear U-Bolts |
|
All |
All |
'76-'81 |
41.46 |
34.95/kit |
|
| 90858 |
Raised Height Front: 2 1/2 inches - NOTE: Quantity Required 2 |
|
All |
All |
'72-'75 |
118.74 |
94.95/each |
|
| 90859 |
Raised Height Front: 2 1/2 inches - Front Kit |
|
All |
All |
'72-'75 |
41.46 |
34.95/kit |
|
| 90860 |
Raised Height Rear: 2 1/2 inches - NOTE: On CJ's with 4 speed transmissions rear driveline will need to be lengthened transfer case cross member will need to be lowered from frame 1/2 inch and driveline vibration will occur. Use Lowering Bracket Kit |
|
All |
All |
'72-'75 |
149.94 |
117.95/each |
|
| 90861 |
Raised Height Rear: 2 1/2 inches - Rear Kit |
|
All |
All |
'72-'75 |
41.46 |
34.95/kit |
|
| 90862 |
Raised Height Front: 1 inch - NOTE: Quantity Required 2 |
|
All |
All |
'72-'75 |
118.74 |
94.95/each |
|
| 90863 |
Raised Height Front: 1 inch Front Kit |
|
All |
All |
'72-'75 |
41.46 |
34.95/kit |
|
| 90864 |
Raised Height Rear: 1 inch - NOTE: Quantity Required 2 |
|
All |
All |
'72-'75 |
118.74 |
94.95/each |
|
| 90865 |
Raised Height Rear: 1 inch - Rear Kit |
|
All |
All |
'72-'75 |
41.46 |
34.95/kit |
|
| 90866 |
Raised Height Front: 2 1/2 inches - NOTE: Quantity Required 2 |
|
All |
All |
'69-'71 |
118.74 |
94.95/each |
|
| 90867 |
Raised Height Front: 2 1/2 inches - Front Kit |
|
All |
All |
'69-'71 |
41.46 |
34.95/kit |
|
| 90868 |
Raised Height Rear: 2 1/2 inches - NOTE: On CJ's with 4 speed transmissions rear driveline will need to be lengthened transfer case cross member will need to be lowered from frame 1/2 inch and driveline vibration will occur. Use Lowering Bracket Kit |
|
All |
All |
'69-'71 |
149.94 |
117.95/each |
|
| 90869 |
Raised Height Rear: 2 1/2 inches Rear Kit |
|
All |
All |
'69-'71 |
41.46 |
34.95/kit |
|
| 90870 |
Raised Height Front: 1 inch - NOTE: Quantity Required 2 |
|
All |
All |
'69-'71 |
118.74 |
94.95/each |
|
| 90871 |
Raised Height Front: 1 inch - Front Kit |
|
All |
All |
'69-'71 |
41.46 |
34.95/kit |
|
| 90872 |
Raised Height Rear: 1 inch - NOTE: Quantity Required 2 |
|
All |
All |
'69-'71 |
149.94 |
117.95/each |
|
| 90873 |
Raised Height Rear: 1 inch - Rear Kit |
|
All |
All |
'69-'71 |
41.46 |
34.95/kit |
|
| 90874 |
Raised Height Front: 2 1/2 inches - NOTE: Most CJ2A CJ3A CJ23B MB M38 M38A1 have a sideways U-type shackle which must be upgraded to plate-type shackle. Our shackle kit also includes the urethane bushings for your frame. Since stock bushings are |
|
All |
All |
'53-'68 |
118.74 |
94.95/each |
|
| 90875 |
Raised Height Front: 2 1/2 inches - Front Kit |
|
All |
All |
'53-'68 |
41.46 |
34.95/kit |
|
| 90876 |
Raised Height Rear: 2 1/2 inches - NOTE: On CJ's with 4 speed transmissions rear driveline will need to be lengthened transfer case cross member will need to be lowered from frame 1/2 inch and driveline vibration will occur. Use Lowering Bracket Kit |
|
All |
All |
'53-'68 |
149.94 |
117.95/each |
|
| 90877 |
Raised Height Rear: 2 1/2 inches Rear Kit |
|
All |
All |
'53-'68 |
41.46 |
34.95/kit |
|
| 90878 |
Raised Height Front: 1 inch - NOTE: Most CJ2A CJ3A CJ23B MB M38 M38A1 have a sideways U-type shackle which must be upgraded to plate-type shackle. Our shackle kit also includes the urethane bushings for your frame. Since stock bushings are usuall |
|
All |
All |
'53-'68 |
118.74 |
94.95/each |
|
| 90879 |
Raised Height Front: 1 inch - Front Kit |
|
All |
All |
'53-'68 |
41.46 |
34.95/kit |
|
| 90880 |
Raised Height Rear: 1 inch - NOTE: Quantity Required 2 |
|
All |
All |
'53-'68 |
149.94 |
117.95/each |
|
| 90881 |
Raised Height Rear: 1 inch Rear Kit |
|
All |
All |
'53-'68 |
41.46 |
34.95/kit |
|
| 90882 |
Raised Height Front: 2 1/2 inch - NOTE: On M38 vehicle spring anchor mounts will need to be drilled out and you must buy Jeep spring anchor bolt (4 per vehicle) to install springs. 2nd NOTE: NOTE: Most CJ2A CJ3A CJ23B MB M38 M38A1 have a sidewa |
|
All |
All |
'46-'63 |
119.94 |
89.95/each |
|
| 90884 |
Raised Height Rear: 2 1/2 inches |
|
All |
All |
'46-'63 |
118.74 |
94.95/each |
|
| 90885 |
Raised Height Rear: 2 1/2 inches Rear Kit |
|
All |
All |
'46-'63 |
41.46 |
34.95/kit |
|
| 90886 |
Raised Height Front: 1 inch - NOTE: Most CJ2A CJ3A CJ23B MB M38 M38A1 have a sideways U-type shackle which must be upgraded to plate-type shackle. Our shackle kit also includes the urethane bushings for your frame. Since stock bushings are usuall |
|
All |
All |
'46-'63 |
87.54 |
68.95/each |
|
| 90887 |
Raised Height Front: 1 inch - Front Kit |
|
All |
All |
'46-'63 |
41.46 |
34.95/kit |
|
| 90888 |
Raised Height Front: 1 inch - NOTE: Most CJ2A CJ3A CJ23B MB M38 M38A1 have a sideways U-type shackle which must be upgraded to plate-type shackle. Our shackle kit also includes the urethane bushings for your frame. Since stock bushings are usuall |
|
All |
All |
'46-'63 |
118.74 |
94.95/each |
|
| 90889 |
Raised Height Rear: 1 inch Rear Kit |
|
All |
All |
'46-'63 |
41.46 |
34.95/kit |
|
| 90890 |
Raised Height Front: 2 1/2 inches - NOTE: Quantity Required 2 |
|
All |
All |
'72-'75 |
118.74 |
94.95/each |
|
| 90891 |
Raised Height Front: 2 1/2 inches - Front Kit |
|
All |
All |
'72-'75 |
41.46 |
34.95/kit |
|
| 90892 |
Raised Height Rear: 2 1/2 inches - NOTE: On CJ's with 4 speed transmissions rear driveline will need to be lengthened transfer case cross member will need to be lowered from frame 1/2 inch and driveline vibration will occur. Use Lowering Bracket Kit |
|
All |
All |
'72-'75 |
149.94 |
117.95/each |
|
| 90893 |
Raised Height Rear: 2 1/2 inches Rear Kit |
|
All |
All |
'72-'75 |
41.46 |
34.95/kit |
|
| 90894 |
Raised Height Front: 2 1/2 inches - NOTE: Quantity Required 2 |
|
All |
All |
'72-'75 |
118.74 |
94.95/each |
|
| 90895 |
Raised Height Front: 2 1/2 inches - Front Kit |
|
All |
All |
'72-'75 |
41.46 |
34.95/kit |
|
| 90896 |
Raised Height Rear: 2 1/2 inches - NOTE: On CJ's with 4 speed transmissions rear driveline will need to be lengthened transfer case cross member will need to be lowered from frame 1/2 inch and driveline vibration will occur. Use Lowering Bracket Kit |
|
All |
All |
'72-'75 |
149.94 |
117.95/each |
|
| 90897 |
Raised Height Rear: 2 1/2 inches Rear Kit |
|
All |
All |
'72-'75 |
41.46 |
34.95/kit |
|
| 90898 |
Raised Height Front: 2 1/2 inches - NOTE: Quantity Required 2 |
|
All |
All |
'72-'75 |
118.74 |
94.95/each |
|
| 90899 |
Raised Height Front: 2 1/2 inches - Front Kit |
|
All |
All |
'72-'75 |
41.46 |
34.95/kit |
|
| 90900 |
Raised Height Rear: 2 1/2 inches - NOTE: On CJ's with 4 speed transmissions rear driveline will need to be lengthened transfer case cross member will need to be lowered from frame 1/2 inch and driveline vibration will occur. Use Lowering Bracket Kit |
|
All |
All |
'72-'75 |
149.94 |
117.95/each |
|
| 90901 |
Raised Height Rear: 2 1/2 inches Rear Kit |
|
All |
All |
'72-'75 |
41.46 |
34.95/kit |
|
Rancho Suspension Lift Kits Increase ride height up to 3 inches utilizing front and rear coil springs and lower links. Increased height permits use of larger wheel and tire combinations, w/o the need for body and fender modifications. System substantially enhances off-road control, and firms ride characteristics for enhanced cornering. Includes detailed installation instructions plus all necessary mounting hardware. WARNING! Installation of a Rancho Suspension System can incrase the risk of vehicle rollover in abrupt maneuvers. Many states have laws governing modification of original equipment suspension systems. Such laws may prohibit any modification which adversely affects safety or any modification altering the suspension more than a specific number of inches. Rancho Suspension recommends that you contact local law enforcement authorities in your area before modifying your suspension.
| 90902 |
Raised Height Front: 3 inches |
|
All |
All |
'95-'97 |
200.34 |
149.95/each |
|
| 90903 |
Raised Height Front: 3 inches - Front Kit - NOTE: 95 and later Grand Cherokees (ZJ) front driveshaft replacement. Driveshafts that measures over 24 1/2 inchs no change required. Driveshafts that measure from 20 up to 24 1/2 inches may require a chan |
|
All |
All |
'95-'97 |
209.94 |
156.95/kit |
|
| 90904 |
Raised Height Rear: 2 inches |
|
All |
All |
'95-'97 |
200.34 |
149.95/each |
|
| 90905 |
Raised Height Rear: 2 inches |
|
All |
All |
'95-'97 |
217.14 |
166.95/kit |
|
| 90906 |
Raised Height Front: 2 inches |
|
All |
All |
'95-'97 |
200.34 |
149.95/each |
|
| 90907 |
Raised Height Front: 2 inches - Front Kit - NOTE: 95 and later Grand Cherokees (ZJ) front driveshaft replacement. Driveshafts that measures over 24 1/2 inchs no change required. Driveshafts that measure from 20 up to 24 1/2 inches may require a chan |
|
All |
All |
'95-'97 |
209.94 |
156.95/kit |
|
| 90908 |
Raised Height Rear: 2 inches |
|
All |
All |
'95-'97 |
200.34 |
149.95/each |
|
| 90909 |
Raised Height Rear: 2 inches |
|
All |
All |
'95-'97 |
217.14 |
166.95/kit |
|
| 90910 |
Raised Height Front: 2 inches |
|
All |
All |
'95-'97 |
200.34 |
149.95/each |
|
| 90911 |
Raised Height Front: 2 inches - Front Kit - NOTE: 95 and later Grand Cherokees (ZJ) front driveshaft replacement. Driveshafts that measures over 24 1/2 inchs no change required. Driveshafts that measure from 20 up to 24 1/2 inches may require a chan |
|
All |
All |
'95-'97 |
209.94 |
156.95/kit |
|
| 90912 |
Raised Height Front: 3 inches - NOTE: Height will vary due to inconsistent factory height. |
|
All |
All |
'93-'94 |
200.34 |
149.95/each |
|
| 90913 |
Raised Height Front: 3 inches - Front Kit - NOTE: 95 and later Grand Cherokees (ZJ) front driveshaft replacement. Driveshafts that measures over 24 1/2 inchs no change required. Driveshafts that measure from 20 up to 24 1/2 inches may require a chan |
|
All |
All |
'93-'94 |
176.34 |
126.95/kit |
|
| 90914 |
Raised Height Rear: 2 inches |
|
All |
All |
'93-'94 |
200.34 |
149.95/each |
|
| 90915 |
Raised Height Rear: 2 inches - Rear Kit |
|
All |
All |
'93-'94 |
176.34 |
126.95/kit |
|
| 90916 |
Raised Height Front: 2 inches - NOTE: Height will vary due to inconsistent factory height. |
|
All |
All |
'93-'94 |
200.34 |
149.95/each |
|
| 90917 |
Raised Height Front: 0 inches - Front Kit - NOTE: Coils should not be installed w/o Rancho lower control arms they are necessary for strength and proper caster adjustments. 2nd NOTE: 95 and later Grand Cherokees (ZJ) front driveshaft replacement. Dr |
|
All |
All |
'93-'94 |
176.34 |
126.95/kit |
|
| 90918 |
Raised Height Rear: 2 inches |
|
All |
All |
'93-'94 |
200.34 |
149.95/each |
|
| 90919 |
Raised Height Rear: 2 inches - Rear Kit |
|
All |
All |
'93-'94 |
176.34 |
126.95/kit |
|
| 90920 |
Raised Height Front: 2 inches - NOTE: Height will vary due to inconsistent factory height. |
|
All |
All |
'93-'94 |
200.34 |
149.95/each |
|
| 90921 |
Raised Height Front: 0 inches - Rear Kit - Front Kit - NOTE: Coils should not be installed w/o Rancho lower control arms they are necessary for strength and proper caster adjustments. 2nd NOTE: 95 and later Grand Cherokees (ZJ) front driveshaft repla |
|
All |
All |
'93-'94 |
176.34 |
126.95/kit |
|
Rancho Suspension Lift Kits Increase ride height up to 2 1/2 inches utilizing front and rear leaf springs and urethane bushings. Increased height permits use of larger wheel and tire combinations, w/o the need for body and fender modifications. System s
| 90922 |
Raised Height Front: 2 1/2 inches - NOTE: Quantity Required 2 |
|
All |
All |
'47-'62 |
90.13 |
79.95/each |
|
| 90923 |
Raised Height Front: 2 1/2 inches - Front Kit includes 2 Front Springs Urethane Bushings Front and Rear U-Bolts |
|
All |
All |
'47-'62 |
41.46 |
34.95/kit |
|
| 90924 |
Raised Height Rear: 2 1/2 inches - NOTE: Requires O.E. replacement bushings. 2nd NOTE: Quantity Required 2 |
|
All |
All |
'47-'62 |
194.34 |
149.95/each |
|
| 90925 |
Raised Height Rear: 2 1/2 inches - Rear Kit includes 2 Rear Springs Urethane Bushings Front and Rear U-Bolts |
|
All |
All |
'47-'62 |
41.46 |
34.95/kit |
|
| 90926 |
Raised Height Front: 2 1/2 inches - NOTE: Most CJ2A CJ3A CJ23B MB M38 M38A1 have a sideways U-type shackle which must be upgraded to plate-type shackle. Our shackle kit also includes the urethane bushings for your frame. Since stock bushings are |
|
All |
All |
'53-'68 |
118.74 |
94.95/each |
|
| 90927 |
Raised Height Front: 2 1/2 inches - Front Kit includes 2 Front Springs Urethane Bushings Front and rear U-Bolts |
|
All |
All |
'53-'68 |
41.46 |
34.95/kit |
|
| 90928 |
Raised Height Rear: 2 1/2 inches - NOTE: On CJ's with 4 speed transmissions rear driveline will need to be lengthened transfer case cross member will need to be lowered from frame 1/2 inch and driveline vibration will occur. Use Lowering Bracket Kit |
|
All |
All |
'53-'68 |
149.94 |
117.95/each |
|
| 90929 |
Raised Height Rear: 2 1/2 inches - Rear Kit includes 2 Rear Springs Urethane Bushings Front and Rear U-Bolts |
|
All |
All |
'53-'68 |
41.46 |
34.95/kit |
|
| 90930 |
Raised Height Front: 1 inch - NOTE: Most CJ2A CJ3A CJ23B MB M38 M38A1 have a sideways U-type shackle which must be upgraded to plate-type shackle. Our shackle kit also includes the urethane bushings for your frame. Since stock bushings are usual |
|
All |
All |
'53-'68 |
118.74 |
94.95/each |
|
| 90931 |
Raised Height Front: 1 inch - Front Kit includes 2 Front Springs Urethane Bushings Front and rear U-Bolts |
|
All |
All |
'53-'68 |
41.46 |
34.95/kit |
|
| 90932 |
Raised Height Rear: 1 inch - NOTE: Quantity Required 2 |
|
All |
All |
'53-'68 |
149.94 |
117.95/each |
|
| 90933 |
Raised Height Rear: 1 inch - Rear Kit includes 2 Rear Springs Urethane Bushings Front and Rear U-Bolts |
|
All |
All |
'53-'68 |
41.46 |
34.95/kit |
|
| 90934 |
Raised Height Front: 2 1/2 inches - NOTE: On M38 vehicle spring anchor mounts will need to be drilled out and you must buy Jeep spring anchor bolt (4 per vehicle) to install springs. 2nd NOTE: Most CJ2A CJ3A CJ23B MB M38 M38A1 have a sideways U- |
|
All |
All |
'46-'63 |
119.94 |
89.95/each |
|
| 90935 |
Raised Height Front: 2 1/2 inches- Front Kit includes 2 Front Springs Urethane Bushings Front and rear U-Bolts |
|
All |
All |
'46-'63 |
41.46 |
34.95/kit |
|
| 90936 |
Raised Height Rear: 2 1/2 inches - NOTE: Quantity Required 2 |
|
All |
All |
'46-'63 |
118.74 |
94.95/each |
|
| 90937 |
Raised Height Rear: 2 1/2 inches - Rear Kit includes 2 Rear Springs Urethane Bushings Front and Rear U-Bolts |
|
All |
All |
'46-'63 |
41.46 |
34.95/kit |
|
| 90938 |
Raised Height Front: 1 inch - NOTE: Most CJ2A CJ3A CJ23B MB M38 M38A1 have a sideways U-type shackle which must be upgraded to plate-type shackle. Our shackle kit also includes the urethane bushings for your frame. Since stock bushings are usuall |
|
All |
All |
'46-'63 |
87.54 |
68.95/each |
|
| 90939 |
Raised Height Front: 1 inch - Front Kit includes 2 Front Springs Urethane Bushings Front and Rear U-Bolts |
|
All |
All |
'46-'63 |
41.46 |
34.95/kit |
|
| 90940 |
Raised Height Rear: 1 inch - NOTE: Quantity Required 2 |
|
All |
All |
'46-'63 |
118.74 |
94.95/each |
|
| 90941 |
Raised Height Rear: 1 inch - Rear Kit includes 2 Rear Springs Urethane Bushings Front and Rear U-Bolts |
|
All |
All |
'46-'63 |
41.46 |
34.95/kit |
|
| 90942 |
Raised Height Front: 2 1/2 inches - NOTE: Most CJ2A CJ3A CJ23B MB M38 M38A1 have a sideways U-type shackle which must be upgraded to plate-type shackle. Our shackle kit also includes the urethane bushings for your frame. Since stock bushings are |
|
All |
All |
'41-'45 |
119.94 |
89.95/each |
|
| 90943 |
Raised Height Front: 2 1/2 inches - Front Kit includes 2 Front Springs Urethane Bushings Front and Rear U-Bolts |
|
All |
All |
'41-'45 |
41.46 |
34.95/kit |
|
| 90944 |
Raised Height Rear: 2 1/2 inches - NOTE: Quantity Required 2 |
|
All |
All |
'41-'45 |
118.74 |
94.95/each |
|
| 90945 |
Raised Height Front: 1 inch - NOTE: Most CJ2A CJ3A CJ23B MB M38 M38A1 have a sideways U-type shackle which must be upgraded to plate-type shackle. Our shackle kit also includes the urethane bushings for your frame. Since stock bushings are usual |
|
All |
All |
'41-'45 |
87.54 |
68.95/each |
|
| 90946 |
Raised Height Front: 1 inch - Front Kit includes 2 Front Springs Urethane Bushings Front and rear U-Bolts |
|
All |
All |
'41-'45 |
41.46 |
34.95/kit |
|
| 90947 |
Raised Height Rear: 1 inch - NOTE: Quantity Required 2 |
|
All |
All |
'41-'45 |
118.74 |
94.95/each |
|
| 90948 |
Raised Height Front: 1-3 inches - NOTE: Rancho highly recommends the use of the constant velocity (Spicer Style) front driveshaft as used in the Jeep factory trailer towing option. The Jeep original equipment light duty double offset joint front dr |
|
All |
All |
'86-'91 |
200.34 |
149.95/each |
|
| 90949 |
Raised Height Front: 1-3 inches - Front Kit includes Front coil springs Lower control arms and Add-a-leafs |
|
All |
All |
'86-'91 |
176.34 |
126.95/kit |
|
| 90950 |
Raised Height Rear: 1 1/2 inches - Rear Kit - NOTE: Not recommended for XJ Cherokee or Comanche with 3 leaf springs. |
|
All |
All |
'86-'91 |
99.00 |
85.95/kit |
|
| 90951 |
Raised Height Front: 1-3 inches - NOTE: Rancho highly recommends the use of the constant velocity (Spicer Style) front driveshaft as used in the Jeep factory trailer towing option. The Jeep original equipment light duty double offset joint front dr |
|
All |
All |
'86-'91 |
200.34 |
149.95/each |
|
| 90952 |
Raised Height Front: 1-3 inches - Front Kit includes Front coil springs Lower control arms and Add-a-leafs |
|
All |
All |
'86-'91 |
176.34 |
126.95/kit |
|
| 90953 |
Raised Height Rear: 1 1/2 inches - Rear Kit - NOTE: Not recommended for XJ Cherokee or Comanche with 3 leaf springs. |
|
All |
All |
'86-'91 |
99.00 |
85.95/kit |
|
| 90954 |
Raised Height Front: 2 1/2 inches - NOTE: Quantity Required 2 |
|
All |
All |
'47-'62 |
90.13 |
79.95/each |
|
| 90955 |
Raised Height Front: 2 1/2 inches - NOTE: If these vehicles have a Detroit-type driveline the driveline must be replaced by a Spicer-type driveline. 2nd NOTE: Quantity Required 2 |
|
All |
All |
'84-'86 |
200.34 |
149.95/each |
|
| 90956 |
Raised Height Front: 2 1/2 inches - Front Kit includes 2 Front springs Add-a-Leafs |
|
All |
All |
'84-'86 |
46.79 |
40.95/kit |
|
| 90957 |
Raised Height Rear: 1 1/2 inches - Rear Kit includes Rear block kit |
|
All |
All |
'84-'86 |
64.74 |
54.95/kit |
|
| 90958 |
Raised Height Front: 2 1/2 inches - NOTE: If these vehicles have a Detroit-type driveline the driveline must be replaced by a Spicer-type driveline. 2nd NOTE: Quantity Required 2 |
|
All |
All |
'81-'83 |
200.34 |
149.95/each |
|
| 90959 |
Raised Height Front: 2 1/2 inches - Front Kit includes 2 Front springs Add-a-Leafs |
|
All |
All |
'81-'83 |
46.79 |
40.95/kit |
|
| 90960 |
Raised Height Rear: 2 1/2 inches - Rear Kit includes Rear block kit |
|
All |
All |
'81-'83 |
90.13 |
79.95/kit |
|
| 90961 |
Raised Height Front: 2 1/2 inches - NOTE: If these vehicles have a Detroit-type driveline the driveline must be replaced by a Spicer-type driveline. 2nd NOTE: Quantity Required 2 |
|
All |
All |
'81-'83 |
200.34 |
149.95/each |
|
| 90962 |
Raised Height Front: 2 1/2 inches - Front Kit includes 2 Front springs Add-a-Leafs |
|
All |
All |
'81-'83 |
46.79 |
40.95/kit |
|
| 90963 |
Raised Height Rear: 2 1/2 inches - Rear Kit includes Rear block kit |
|
All |
All |
'81-'83 |
90.13 |
79.95/kit |
|
| 90964 |
Raised Height Front: 1 1/2 inches - NOTE: If these vehicles have a Detroit-type driveline the driveline must be replaced by a Spicer-type driveline. 2nd NOTE: Quantity Required 2 |
|
All |
All |
'79-'80 |
200.34 |
149.95/each |
|
| 90965 |
Raised Height Front: 1 1/2 inches - Front Kit includes 2 Front springs Add-a-Leafs |
|
All |
All |
'79-'80 |
46.79 |
40.95/kit |
|
| 90966 |
Raised Height Rear: 1 1/2 inches - Rear Kit includes Rear block kit |
|
All |
All |
'79-'80 |
64.74 |
54.95/kit |
|
| 90967 |
Raised Height Front: 2 1/2 inches - NOTE: If these vehicles have a Detroit-type driveline the driveline must be replaced by a Spicer-type driveline. 2nd NOTE: Quantity Required 2 |
|
All |
All |
'78 |
200.34 |
149.95/each |
|
| 90968 |
Raised Height Front: 1 1/2 inches - Front Kit includes 2 Front springs Add-a-Leafs |
|
All |
All |
'78 |
46.79 |
40.95/kit |
|
| 90969 |
Raised Height Rear: 2 1/2 inches - Rear Kit includes Rear block kit |
|
All |
All |
'78 |
90.13 |
79.95/kit |
|
| 90970 |
Raised Height Front: 3 inches - NOTE: If these vehicles have a Detroit-type driveline the driveline must be replaced by a Spicer-type driveline. 2nd NOTE: Quantity Required 2 |
|
All |
All |
'78 |
200.34 |
149.95/each |
|
| 90971 |
Raised Height Front: 1 1/2 inches - Front Kit includes 2 Front springs Add-a-Leafs |
|
All |
All |
'78 |
46.79 |
40.95/kit |
|
| 90972 |
Raised Height Rear: 2 1/2 inches - Rear Kit includes Rear block kit |
|
All |
All |
'78 |
200.34 |
149.95/kit |
|
| 90973 |
Raised Height Front: 3 inches - NOTE: If these vehicles have a Detroit-type driveline the driveline must be replaced by a Spicer-type driveline. 2nd NOTE: Quantity Required 2 |
|
All |
All |
'74-'77 |
200.34 |
149.95/each |
|
| 90974 |
Raised Height Front: 3 inches - NOTE: If these vehicles have a Detroit-type driveline the driveline must be replaced by a Spicer-type driveline. 2nd NOTE: Quantity Required 2 |
|
All |
All |
'74-'77 |
46.79 |
40.95/kit |
|
| 90975 |
Raised Height Rear: 2 1/2 inches - Rear Kit includes Rear block kit |
|
All |
All |
'74-'77 |
90.13 |
79.95/kit |
|
| 90976 |
Raised Height Front: 3 inches - NOTE: If these vehicles have a Detroit-type driveline the driveline must be replaced by a Spicer-type driveline. 2nd NOTE: Quantity Required 2 |
|
All |
All |
'74-'77 |
200.34 |
149.95/each |
|
| 90977 |
Raised Height Front: 3 inches - NOTE: If these vehicles have a Detroit-type driveline the driveline must be replaced by a Spicer-type driveline. 2nd NOTE: Quantity Required 2 |
|
All |
All |
'74-'77 |
46.79 |
40.95/kit |
|
| 90978 |
Raised Height Rear: 2 1/2 inches - Rear Kit includes Rear block kit |
|
All |
All |
'74-'77 |
90.13 |
79.95/kit |
|
| 90979 |
Raised Height Front: 2 1/2 inches - NOTE: Remove 1/2 inch O.D. x 7/16 inch I.D. sleeves if used from the old spring shackle ends and insert sleeves into the Rancho bushings. 2nd NOTE: Quantity required 2 |
|
All |
All |
'82 |
130.07 |
106.95/each |
|
| 90980 |
Raised Height Front: 2 1/2 inches |
|
All |
All |
'82 |
41.46 |
34.95/kit |
|
| 90981 |
Raised Height Rear: 2 1/2 inches - NOTE: On CJ's with 4 speed transmissions rear driveline will need to be lengthened transfer case cross member will need to be lowered from frame 1/2 inch and driveline vibration will occur. Use Lowering Bracket Kit |
|
All |
All |
'82 |
148.74 |
117.95/each |
|
| 90982 |
Raised Height Rear: 2 1/2 inches - Rear Kit |
|
All |
All |
'82 |
41.46 |
34.95/kit |
|
| 90983 |
Raised Height Front: 1 inch - NOTE: Quantity Required 2 |
|
All |
All |
'82-'86 |
149.94 |
117.95/each |
|
| 90984 |
Raised Height Front: 1 inch - Front Kit |
|
All |
All |
'82-'86 |
41.46 |
34.95/kit |
|
| 90985 |
Raised Height Rear: 1 inch - NOTE: Quantity Required 2 |
|
All |
All |
'82-'86 |
149.94 |
117.95/each |
|
| 90986 |
Raised Height Rear: 1 inch - Rear Kit |
|
All |
All |
'82-'86 |
41.46 |
34.95/kit |
|
| 90987 |
Competion System: Raised Height Front: 2 inches - NOTE: Quantity Required 2 |
|
All |
All |
'76-'86 |
200.34 |
149.95/each |
|
| 90988 |
Competion System: Raised Height Front: 2 inches - Front Kit |
|
All |
All |
'76-'86 |
73.14 |
59.95/kit |
|
| 90989 |
Competion System: Raised Height Rear: 2 inches - NOTE: Quantity Required 2 |
|
All |
All |
'76-'86 |
250.74 |
194.95/each |
|
| 90990 |
Raised Height Front: 2 1/2 inches - NOTE: Quantity Required 2 |
|
All |
All |
'76-'81 |
130.07 |
106.95/each |
|
| 90991 |
Raised Height Front: 2 1/2 inches - Front Kit |
|
All |
All |
'76-'81 |
41.46 |
34.95/kit |
|
| 90992 |
Raised Height Rear: 2 1/2 inches - NOTE: On CJ's with 4 speed transmissions rear driveline will need to be lengthened transfer case cross member will need to be lowered from frame 1/2 inch and driveline vibration will occur. Use Lowering Bracket Kit |
|
All |
All |
'76-'81 |
148.74 |
117.95/each |
|
| 90993 |
Raised Height Rear: 2 1/2 inches - Rear Kit |
|
All |
All |
'76-'81 |
41.46 |
34.95/kit |
|
| 90994 |
Raised Height Front: 1 inch - NOTE: Quantity Required 2 |
|
All |
All |
'76-'81 |
149.94 |
117.95/each |
|
| 90995 |
Raised Height Front: 1 inch - Front Kit |
|
All |
All |
'76-'81 |
41.46 |
34.95/kit |
|
| 90996 |
Raised Height Rear: 1 inch - NOTE: Quantity Required 2 |
|
All |
All |
'76-'81 |
173.94 |
134.95/each |
|
| 90997 |
Raised Height Rear: 1 inch - Rear Kit |
|
All |
All |
'76-'81 |
41.46 |
34.95/kit |
|
| 90998 |
Raised Height Front: 2 1/2 inches - NOTE: If these vehicles have a Detroite-type driveline the driveline must be replaced by a Spicer-type driveline. 2nd NOTE: Height will vary due to in |
Site Map
